HELICON Series - In-Wall

The Helicon In-Wall 200 Phantom 2-way speakers utilize a 6.5” woofer/midrange and the DALI Hybrid Tweeter Module to produce superior sound. The non-resonant enclosure helps these speakers put out clear, clean sound when embedded into a home theater wall or ceiling.

•  Frequency range+/- 3 dB [Hz] min 64
•  Frequency range+/- 3 dB [Hz] max 27000
•  Sensitivity (2,83 V/1 m) [dB] 89
•  Nominal impedance [ohms] 8
•  Maximum SPL [dB] 107
•  Recommended amp. power [Watts] min 30
•  Recommended amp. power [Watts] max 150
•  Crossover frequencies [Hz] 3.000/13.000
•  Hybrid tweeter module, Super high freq. driver, Quantity 1
•  Hybrid tweeter module, Super high freq. driver, Dimension [mm] 10 x 55
•  Hybrid tweeter module, Super high freq. driver, Diaphragm type Ribbon
•  Hybrid tweeter module, High frequency driver, Quantity 1
•  Hybrid tweeter module, High frequency driver, Dimension [mm] 25
•  Hybrid tweeter module, High frequency driver, Diaphragm type Soft textile dome
•  Low frequency driver, Quantity 1
•  Low frequency driver, Dimension [inches] 6½"
•  Low frequency driver, Diaphragm / cone type Wood fiber cone
•  Enclosure type Closed
•  Connection input(s) Single wire
•  Connection output(s) Stereo "line level" (high pass filtered)
•  Recommended placement(s) Built-in (In-Wall)
•  Dimensions (H) [cm] 48
•  Dimensions (W) [cm] 29
•  Dimensions (D) [cm] 11
•  Dimensions (H) [inches] 18,8
•  Dimensions (W) [inches] 11,2
•  Dimensions (D) [inches] 4,3
•  Weight [kg] 7,0
•  Weight [lb] 15,4
•  Cut-out dimensions (H) [cm] 43,2
•  Cut-out dimensions (W) [cm] 24
•  Cut-out dimensions (D) [cm] 10
•  Cut-out dimensions (H) [inches] 17
•  Cut-out dimensions (W) [inches] 9,45
•  Cut-out dimensions (D) [inches] 4
•  Finish (type) Lacquer